Pre-lit or unlit, the flocked tree question
A pre-lit tree saves you an hour with a tangle of lights, and an unlit tree lets you choose every bulb. On a flocked tree the choice matters a little more, because wrapping lights around white branches knocks flocking loose.
The difference
A pre-lit tree comes with light strings already wired along the branches at the factory. You stack the sections, plug in, and the lights are where the maker put them.
An unlit tree is bare. You buy the lights separately, wrap them yourself, and take them off again when the season ends, or leave them on if storage allows.
Five of the six trees in our list are pre-lit. The Yaheetech 7.5 ft is the one unlit tree, chosen for people who want to light it their own way.
What the pre-lit trees come with
| Tree | Lights | Type | Lights warranty |
|---|---|---|---|
| Best Choice Products 7.5 ft | 550 | Warm white LED, 3 modes | Not listed |
| Hykolity 7.5 ft | 450 | Warm white LED | Not listed |
| National Tree Acacia Slim | 350 | Clear incandescent, UL-listed | 2 years |
| National Tree Wintry Pine | 650 | Clear | 2 years |
| National Tree 3 ft mini | 50 | Clear incandescent | None listed |
| Yaheetech 7.5 ft | None | Bring your own | Not applicable |
The Best Choice Products tree is the only one with light modes, offering twinkle, slow fade and a steady glow. Our guide to LED or incandescent tree lights explains how the two bulb types differ on white branches.
What a pre-lit tree saves you
Stringing a 7.5 ft tree by hand takes a long evening and several strings. A pre-lit tree spreads the bulbs evenly from trunk to tip, and you never hunt for the plug end behind the branches.
On a flocked tree it saves flocking too. Every pass of a light string around a white branch rubs some of the coat off, and a pre-lit tree skips that step entirely.
Where pre-lit trees let you down
The weak spot is the lights themselves. Owners of the Best Choice, Hykolity and Wintry Pine trees all report sections that stop working, and some mini owners say half the tree went dark or bulbs burned out after a year or two.
When a pre-lit section fails, you are left hunting for the bad bulb or covering the dark patch with an extra string. The tree may outlive its lights by years, which is the main argument for unlit.
The two National Tree Company 7.5 ft trees soften this. Their listings say the rest of the bulbs stay lit when one goes out, and both carry a 2-year lights warranty next to 5 years on the tree.
Check a pre-lit tree the day it arrives
Plug in each section before you fluff it, while the box and the return window are still at hand. A dark section is far easier to report on day one than in the middle of December.
Look over the cords as you go. Replace or return any string with a worn cord or loose bulb connections, as NFPA and CPSC advise, rather than taping it up.
Who should buy unlit
- You already own good lights and want to keep using them
- You want multicolor, cool white or smart lights instead of the warm white or clear sets most pre-lit trees carry
- You expect the tree to last longer than any factory string, and want to replace lights without replacing the tree
- You like the ritual of lighting the tree and do not mind the extra hour
The Yaheetech 7.5 ft unlit tree suits that buyer. It has 1,284 bendable tips across 55 in, the widest base in our list, and stand caps that protect hard floors.
Owners describe a full, natural shape and easy assembly. They also mention messy flocking at setup and some gaps after fluffing, which your own lights can help hide.
Bendable tips help when you string lights, because you can bend a tip over a wire to hold it in place. You can see the Yaheetech 7.5 ft unlit tree on Amazon in its other sizes, from 4 ft 7 in up to 9 ft.
Who should stay with pre-lit
If you set the tree up alone or want it finished in under an hour, pre-lit wins. The same goes for anyone who stores the tree in a small closet, since there are no loose strings to wind and untangle.
Stringing your own lights on a flocked tree
- Fluff first. Open every branch before a single bulb goes on, as our setup and fluffing guide explains
- Test each string on the floor before it goes on the tree
- Check the label for a UL or ETL mark, and read the maker’s limit on strings connected end to end
- Start at the bottom near the outlet and work up, tucking wire toward the trunk
- Lay a sheet down first, since wrapping knocks loose more white
What it costs
Price bands only tell part of the story. The Yaheetech sits in the under $150 band, and the Best Choice tree in the $150 to $250 band, but the unlit tree still needs lights before it glows.
Our head-to-head of the Best Choice pre-lit and the Yaheetech unlit weighs those two directly. For other trees under $150, see our guide to a cheap flocked Christmas tree and what it lacks.
How the lights shape the decorating
Warm white and clear lights suit most flocked trees, and they leave the color to your ornaments. With an unlit tree you can pick the light color first and plan the rest around it.
Our guide on decorating a flocked tree pairs color schemes with light types. To compare all six trees, start with our best pre-lit flocked tree page and its cards for the Best Choice tree and the Yaheetech.
If you would rather plug in and be done
The Best Choice Products 7.5 ft tree comes with 550 warm white LEDs and three light modes, sold by the brand itself. Owners report that some sections can stop working, so test it as soon as it arrives.