How to decorate a flocked tree

White flocking does half the decorating for you. It works as a pale backdrop, so colors look stronger and lights look softer than they do on a green tree.

Why a flocked tree decorates differently

On a green tree, ornaments stand out against dark needles. On a flocked tree the background is white and green together, so pale ornaments can disappear while saturated colors jump forward.

Flocking also sheds when touched. Every ornament you hang costs a little white, so plan the scheme before you start instead of moving things around three times.

If you are still deciding between a snowy tree and a plain one, our flocked or green tree guide sets out how the two compare. Decorating is one of the bigger differences.

Start with the lights

Lights set the tone before any ornament goes on. Clear incandescent bulbs cast a warm, faintly golden light that sits well on white flocking, and warm white LEDs come close to that look.

Cool white LEDs look bluish, which suits an icy scheme and fights a warm one. Our LED or incandescent lights guide covers the differences in heat and power use.

A pre-lit tree makes this choice for you. If you want a color of light the pre-lit trees don’t offer, an unlit tree and your own strings is the route, as the pre-lit or unlit guide explains.

The Yaheetech 7.5 ft unlit tree is the one in our lineup with no lights at all. Every scheme below is open to it.

The order that saves flocking

Decorate in layers, from the trunk outward. Each layer then sits in front of the last, and you handle each branch fewer times.

  1. Lights first, worked from the trunk out along each branch
  2. Garland or ribbon next, draped loosely
  3. Large ornaments deep inside the branches to add depth
  4. Medium and small ornaments toward the tips
  5. Picks, sprays and the topper last

Wear thin gloves or wash your hands afterward, since flocking sticks to skin. Hang each ornament once, on a firm part of the branch rather than a drooping tip.

Six color schemes for a flocked tree

SchemeLights that suit itFinishing touch
Red and whiteClear or warm whiteRed berry picks, plaid ribbon
Gold and champagneClear or warm whiteGold ribbon, star topper
Silver and icy blueCool white LEDGlass icicles, mirrored balls
WoodlandClearPine cones, wood beads, burlap
Blush and rose goldWarm whiteVelvet ribbon
All white and clearWarm or cool whiteTextured ornaments

1. Red and white

This is the classic. Red ornaments look brighter against white flocking than against green needles, and plaid ribbon or red berry picks finish the look.

The National Tree Wintry Pine comes with red berry clusters and pine cones attached, so it starts halfway there. Add red glass balls to its clear lights and it is close to done.

2. Gold and champagne

Gold, champagne and cream suit clear bulbs or warm white LEDs, which share their warmth. Mix shiny and matte finishes so the ornaments don’t blend into the flocking.

Gold ribbon in loose loops and a star topper keep the look formal. It is the scheme most likely to suit a pre-lit tree with warm lights.

3. Silver and icy blue

Silver, pale blue and clear glass make a winter scheme that leans into the snow. It is the one place where cool white LEDs work well.

Add mirrored ornaments or glass icicles for sparkle. Keep a few deep blue pieces, because pale blue alone can vanish against white.

4. Woodland

Pine cones, wooden beads, felt animals and dried orange slices turn a flocked tree into a snowy forest. Natural browns and greens show up clearly on white.

It suits clear bulbs and forgives a mix of ornaments you already own. The Wintry Pine’s attached cones give it a head start here as well.

5. Blush and rose gold

Soft pink and rose gold give a lighter, modern look. Put the deeper shades near the tips so the pastels don’t wash out against the flocking.

Warm white lights keep pink flattering. Velvet ribbon in dusty pink suits a snowy tree better than shiny satin.

6. All white and clear

White ornaments and clear glass on a white tree make the quietest scheme, and it depends on texture. Mix glitter, frosted, pearl and ribbed finishes so the shapes stay visible.

It suits a slim tree or a pared-back room. Our guide to slim and tabletop flocked trees covers decorating when space is tight.

Ribbon, garland and toppers

Ribbon tucked in loose loops adds color without much weight. Wired ribbon holds its shape on soft flocked branches better than plain ribbon.

Keep garland light, since heavy beaded or fabric garland drags the tips down and rubs off flocking. A topper should still leave 6 to 12 inches below the ceiling, so measure before you buy a tall one.

Ornament weight and the flocking

Heavy glass ornaments bend tips and rub off white. Hang them close to the trunk, where the branches are sturdier, and save the outer tips for light pieces.

Shatterproof ornaments on the lower branches make sense with kids or pets in the house. Plastic baubles look like glass from a few feet away and don’t break when they drop.

Pick the tree, then the scheme

A tree with decorations already attached saves time but narrows your choices. Our Best Choice or Wintry Pine comparison weighs a plain flocked tree against one that comes decorated.

For a blank canvas, see the best flocked Christmas tree to decorate on our home page, or browse all six trees. The which kind of tree section sums up how each one is lit.

If you want a head start on decorating

National Tree Company ships the Wintry Pine flocked and decorated, carrying 650 clear lights plus pine cones and red berry clusters, which suits the red and woodland schemes. It sits in the over $250 band, and some owners question the value or find it thinner than pictured.

Questions and answers

More questions about decorating a flocked tree

What color lights look best on a flocked tree?

Warm white LEDs and clear incandescent bulbs both cast a warm light that reads well against white flocking. Cool white LEDs look bluish and suit a silver and icy blue scheme.

What colors go with a white flocked tree?

Most colors do. Red, gold, silver and blue, woodland browns and blush pink all show up well, while pale ornaments need texture or a deeper accent so they don’t disappear.

How do I hang ornaments without the flocking falling off?

Plan the scheme first, hang each ornament once, and put heavy pieces near the trunk. Thin gloves help, and an old sheet under the tree catches what falls.

Should I put ribbon on a flocked tree?

Yes, if it is light. Wired ribbon in loose loops holds its shape on soft branches, while heavy garland drags the tips down and rubs off flocking.

Do I need to decorate a tree with pine cones and berries?

Not much. The National Tree Company Wintry Pine has its pine cones and red berry clusters attached already, so a few red or woodland ornaments and a topper finish it.